Copper Soldering Braid Wick BGA Desoldering Remover Wire | FPC

  • £2.99

Only 5 left!

Item description:
Braided Copper Wire Desoldering Wick Saturated With Wash-Free RMA Flux.

Sn63% and 60% (tin content) / good absorbability.

1.5 meters length.

Please select desired width size


  • Place the desoldering wick over the solder to be removed, then push the heated soldering iron tip onto the desoldering wick. The solder will be absorbed.
  • Remove the desoldering wick after the solder has been absorbed.
  • Cut off the used section of the wick using scissors.
  • Repeat steps 1,2 and 3 if the solder is not removed completely. Absorbability may differ depending on the type of solder.

We Also Recommend