Copper Soldering Braid Wick BGA Desoldering Remover Wire
Braided Copper Wire Desoldering Wick Saturated With Wash-Free RMA Flux.
Sn63% and 60% (tin content) / good absorbability.
1.5 meters length.
Please select desired width size
HOW TO USE
- Place the desoldering wick over the solder to be removed, then push the heated soldering iron tip onto the desoldering wick. The solder will be absorbed.
- Remove the desoldering wick after the solder has been absorbed.
- Cut off the used section of the wick using scissors.
- Repeat steps 1,2 and 3 if the solder is not removed completely. Absorbability may differ depending on the type of solder.
We Also Recommend
iPhone 6S 6 SE 5S 5C Plus Opening Repair Tool Kit Screwdriver Set & Suction Cap
B-7000 15ml Clear Flexible Glue Precision Tip for iPhone Samsung iPad Repairs